Walk into most small offices and the network is an archaeology dig. A router from the internet provider. A consumer Wi-Fi box from a big-box store. A second one added when the back office had no signal.

A camera system on its own app. A door buzzer on another. Nobody has the passwords to half of it.

When ALCO designs a network, we build it on Ubiquiti's UniFi line. Here is why, in plain terms, what we do with it, how the pieces fit together, and what you can check on your own network this week, whatever brand it runs on.

What a UniFi network is made of

A UniFi network has two layers. At the top is a console, a device that runs Ubiquiti's UniFi OS and hosts the UniFi applications. Below it is everything the console manages: switches, access points, cameras, door hardware and phones. Ubiquiti's introduction to UniFi recommends a Cloud Gateway, an all-in-one unit that combines the gateway with the console and comes with UniFi Network preinstalled, while a CloudKey runs UniFi Network for sites that do not want a UniFi gateway. In the networks we deploy, the gateway is the firewall, the router and the controller.

Each application does one job. UniFi Network runs the gateway, switches and Wi-Fi, UniFi Protect runs the cameras, UniFi Access runs the doors and UniFi Talk runs the phones. On a console that supports them, they run side by side, and Site Manager, which Ubiquiti describes as license-free, gathers every site an administrator owns or has been granted access to under one UI Account sign-in. That is where the one-screen experience comes from.

A new device joins by adoption, which Ubiquiti describes as connecting the device to the gateway and the application that manages it. Most devices adopt automatically, and for Cloud Gateway users Ubiquiti recommends adopting through the UniFi mobile app. From then on the console holds the device's settings, and its system backups include the operating system, application and device configurations.

Remote access runs through Site Manager on the web and the UniFi mobile app, both signed in with a UI Account. Ubiquiti's setup guide calls the account optional but strongly recommends it, because it brings remote management, automatic system backups and email notifications. Remote management is enabled by default during setup. The control plane itself stays on site: Ubiquiti's cloud architecture guide says the cloud brokers a direct connection to each site's local control plane, and its local management guide covers signing in from the office network when the internet is down.

One console

A UniFi network puts the gateway, the switches, the Wi-Fi access points, the cameras and the door readers in one console. One place to see what is connected, one place to change a setting, one app on the owner's phone. When the front door unlocks at 8:02, when a switch port goes down, when a guest network is needed for Friday's event, it is all the same screen.

It also means one set of administrator accounts and one record of what changed. Ubiquiti's system logs guide lists admin activity, such as configuration changes and administrators accessing UniFi Network, alongside events like a WAN failover or a device going offline, and the logs can be sent to a syslog server or SIEM for long-term retention. Access comes in defined roles: the Owner, Super Admins with full administrative access to a site, and narrower roles such as Hotspot Operator for guest Wi-Fi and Door Attendant for opening doors and talking to visitors. A mixed-brand network often has a separate login and a separate log on every box, if it keeps a log at all.

No per-device fee for the core platform

The core network console does not charge a monthly fee per access point or per switch. Cameras record to your own UniFi storage, so you are not paying a cloud fee to see your own footage, and you choose how long to keep it. That changes the math for a small business compared with systems that bill per device forever.

Ubiquiti's getting-started guide for Protect says it combines on-premise video storage with remote management "without any licensing fees." How long footage lasts depends on drive capacity and on settings such as resolution, recording mode and each camera's Recording Retention. Protect 5.1 and later add Enhanced Retention under Settings > Storage Manager, which keeps recent footage at full quality and automatically downgrades older recordings to low quality to stretch the drive. Ubiquiti's storage guide warns that downgraded footage cannot be restored to high quality, so decide how many days of full-quality video you need before you switch it on.

No fee is not the same as no cost. Budget for the hardware, the drives that hold the footage, the cabling and the labor.

Ubiquiti also sells optional extras on top of the core platform. CyberSecure Enhanced by Proofpoint and Cloudflare, which Ubiquiti calls a premium security service, adds a larger library of intrusion-prevention signatures and Cloudflare-powered content filtering on supported gateways. UniFi Cloud Storage can hold off-site archives of Protect recordings for the cameras and detection types you choose, at $5 per terabyte per month of storage used, with a $5 monthly minimum plus tax. Protect's Off-Site Archiving setting can also send recordings to Google Drive, OneDrive, Dropbox or a NAS. An off-site copy is worth considering, because footage kept only on a recorder in the office can be lost along with the recorder, while Ubiquiti says recordings archived to Cloud Storage stay accessible when the console is offline.

Power over the cable

UniFi switches with PoE power the access points, cameras, phones and door readers over the network cable. No wall adapters behind the ceiling tiles, no outlet hunting, and a device can be rebooted from the console.

Two numbers decide whether a switch can do the job. The first is per port: Ubiquiti's PoE guide lists standard PoE (802.3af) at 12.95 watts delivered to the device, PoE+ (802.3at) at 25.5 watts, and the two 802.3bt types it calls PoE++ and PoE+++ at 51 and 71 watts for heavier devices. The second is the switch's total power budget, which Ubiquiti calls PoE Availability. The guide says it must be greater than the sum of all device power requirements to prevent instability or failure.

The common mistake is buying the switch first and counting later. Ubiquiti lists its Lite switches at 45 to 52 watts of PoE Availability, which a few access points and cameras can use up quickly. Count every powered device from the power table in Ubiquiti's guide or the spec sheet, add the camera you already know you will want next year, and buy for that total.

Separate networks on one set of wires

Staff on one network, guests on another, printers and point-of-sale devices on a third, cameras and doors on a fourth with no internet access at all. These are called VLANs, and they are the single most effective thing you can do to stop a problem on one device spreading to everything. We put them on every install. CISA makes a similar case in its StopRansomware Guide, which says network segmentation can help contain the impact of any intrusion and limit how far an attacker can move.

In UniFi, a VLAN starts as a virtual network created under Settings > Networks. You give it a name, and can set its VLAN ID, address range and DHCP options. Ubiquiti points out that creating it does not move any device onto it. Each Wi-Fi network, or SSID, is mapped to a VLAN (a feature called PPSK can split one SSID across several by password), and wired devices are assigned by switch port, so the plan has to say which SSID and which ports go where.

Separate is not the same as isolated. Zone-based firewalling arrived with UniFi Network 9.0 and needs a UniFi gateway on version 4.1 or newer. Each network sits in exactly one zone, and the built-in zones are Internal, External, Gateway, VPN, Hotspot and DMZ. In Ubiquiti's default zone matrix, traffic from Internal to Internal is Allow All, so if the camera network and the staff network both sit in the Internal zone and nothing else is done, every staff laptop can still reach the cameras.

The fix is deliberate policy. Network Isolation, a single setting on each network under Settings > Networks, automatically configures the firewall rules that block traffic between VLANs. The zone-based firewall handles the exceptions, such as letting staff reach a printer, and an Allow policy can include Auto Allow Return Traffic, which adds a built-in policy for the replies so you do not have to build a second policy in the other direction. The Flows page, under Insights in UniFi Network, shows what was blocked and the name of the policy that blocked it. If a blocked attempt does not appear, Ubiquiti says to check that flow logging is on for that policy.

Guest Wi-Fi done properly

The shortcut to avoid is putting guests on the staff network with a second password. Ubiquiti's guest Wi-Fi best-practice guide sets out the controls in order:

  • Pick or create the guest network under Settings > Networks and turn on Network Isolation.
  • Assign that network to the guest SSID under Settings > WiFi.
  • Turn on Hotspot Portal if guests should authenticate through a captive portal first.
  • Turn on Client Device Isolation so devices on the same access point cannot reach each other.
  • Turn on Device Isolation (ACL) to complete the isolation at the switch.

The same guide suggests Proxy ARP on the guest SSID to reduce congestion and airtime use, and optional speed limits to share bandwidth fairly. For the security setting, Ubiquiti's SSID guide uses WPA2/3 Personal by default and suggests a dedicated SSID for smart devices that cannot connect with it. Setting an SSID to WPA2 Personal for those older devices turns off 6 GHz on that SSID.

Then test it. From a phone on the guest network, the printer's web page should fail to load, and so should anything else on the staff network.

What we deploy

Gateways as the firewall, router and controller, with VPN for remote staff and failover to a second internet line where it matters. Switches from 8 to 48 ports. Access points placed from a survey of the actual building, including warehouses, outdoor areas and long-range links to the shop across the lot. Cameras from doorbells to pan-tilt-zoom. Door readers with badges, PINs and phone unlock, with a log of who came in when.

For remote staff, the VPN server on a UniFi gateway can be set up manually with WireGuard, OpenVPN or L2TP. Teleport, Ubiquiti's one-click option, uses WireGuard and the WiFiman app, and each invitation expires in 24 hours and works on one device at a time. Ubiquiti's remote access guide contrasts a VPN with port forwarding, where security rests on the exposed device and traffic is not encrypted by default.

Failover keeps one internet line active with the others on standby. By default the gateway sends three probes, a ping to Ubiquiti and DNS lookups through Cloudflare's and Google's resolvers, and marks a line down if any two fail. Traffic moves to the next line in priority order and returns to the primary once it recovers.

Doors need more than a reader. Ubiquiti's getting-started guide for Access lists the parts of each door: a console that supports the Access application, an Access Control Hub whose terminals connect to the lock, a reader that connects to the hub, and a compatible lock. The Access Ultra combines the hub and the reader in one device for a single door.

The hardware is the easy part

Buying UniFi gear is easy. Designing it well and keeping it right is the work. Ubiquiti's own support article draws the same line. Every UniFi customer gets free 24/7 chat and email technical support, but for design and product selection Ubiquiti points to its Design Center, its pre-sales team for qualifying enterprise projects or a UniFi solution provider, and for hands-on configuration to a solution provider, MSP or system integrator. Customers or their implementation partner are responsible for designing custom firewall, routing, traffic and VPN policies.

Design. A survey of the building, a coverage plan, a VLAN plan, a parts list and a drawing before anything is ordered.

Install. Hardware supplied by ALCO or bought in your name, racked, cabled, labeled, adopted and configured, and cut over in a window you choose, with the old gear ready to go back if anything surprises us.

Monitoring. Every gateway, switch and access point reports in. A dropped link or a failing device is seen before your team feels it.

Updates. Firmware and controller updates tested and applied in maintenance windows, not whenever the vendor pushes them.

Changes. A new VLAN, a new camera, a guest network for an event. One help desk request.

Config backups. Configurations backed up, so a dead switch is a swap and a restore, not a rebuild from memory.

Documentation. A current map, an inventory, the addressing and the credentials in myALCO. It is your network. You can see it.

Updates are a security job

UniFi updates are managed from Update Manager in Site Manager, or per console and application under Settings > Control Plane > Updates, where you choose the release channel, Official or Early Access, and the auto-update settings. Device firmware updates are found in each application's settings.

The schedule matters because the console is a target. On June 23, 2026, CISA added three Ubiquiti UniFi OS vulnerabilities to its Known Exploited Vulnerabilities catalog, based on evidence of active exploitation, and gave federal agencies until June 26 to act. NIST's National Vulnerability Database shows all three published on May 22, 2026, lists a CVSS score of 10.0, rated critical, for the first of them, and points to Ubiquiti's Security Advisory Bulletin 064 for the fix. CISA encourages all organizations, not only federal agencies, to prioritize fixing the vulnerabilities in that catalog.

Whoever runs your network, the rule is the same. Routine releases can wait for a tested, scheduled window, but a fix for a flaw that attackers are already using should not wait for the next routine one. CISA's StopRansomware Guide points the same way, asking organizations to prioritize timely patching of internet-facing servers, especially for known exploited vulnerabilities, and to update VPNs and network infrastructure devices with the latest software patches.

Owner account and backups

Some things on a UniFi console only the Owner can do. Ubiquiti's roles guide describes the Owner as the account that originally set up the console, with the highest level of access, and says some features are exclusive to it. Its backup guide says that with System Backups turned on under Settings > Control Plane > Backups, a cloud backup is made automatically each week and before each major update. Those backups are saved to the Owner's UI Account and only the Owner can manage them, while the same settings page lets you download a local backup file, which belongs somewhere other than the console itself.

That makes the Owner account a business asset. Ubiquiti's password recovery guide says it does not have access to users' credentials, and if the Owner can no longer get in, there is no way to recover the current deployment; the path is a factory reset and a fresh setup. Ownership can be handed over from the Owner account, using Transfer Ownership in the Control Plane, to an administrator already on the console. If the Owner is a former employee's personal account or a previous installer, sort that out while that person can still sign in.

Protect that sign-in like the company's email. CISA's StopRansomware Guide recommends phishing-resistant multi-factor authentication for all services, particularly email, VPNs and accounts that access critical systems, and the account that owns your network qualifies. Store its recovery details where the business, not one person, can find them.

Footage is a separate question. Ubiquiti's backup guide notes that existing Protect recordings cannot be transferred between consoles and stay on the original one's drives until those are removed or reformatted, so retention and off-site copies need their own plan.

A worked example

Imagine a ten-person accounting office with a reception area, a conference room used by visiting clients, two desk phones, four cameras and one front door with a badge reader. This is how the plan comes together on paper before anything is ordered.

Networks come first. Staff laptops on one network, printers and phones on a second, client Wi-Fi on an isolated guest network, and cameras and the door hardware on a fourth with no internet access. The firewall plan is written in plain words before anyone opens a settings page: staff reach the printers and the internet, printers answer staff but never start a conversation with a laptop, guests reach only the internet, and the security devices talk only to the console.

Power comes next. Using the figures in Ubiquiti's PoE guide, three U7 Pro access points at 21 watts each come to 63 watts, four G5 Bullet cameras at 5 watts add 20, two Phone Touch desk phones at 8 watts add 16, and an Access Ultra, the all-in-one hub and reader, adds 18. That is 117 watts before any headroom, more than twice what a Lite switch offers. The access points and the Access Ultra also need PoE+ ports, because standard PoE delivers at most 12.95 watts to the device, so the parts list calls for a PoE+ switch with a PoE Availability comfortably above 117 watts.

After installation come the checks. From a phone on guest Wi-Fi, the printer's web page fails to load, and from a staff laptop, printing works. The Flows page shows the blocked attempts and the policies that blocked them. Before the old router comes out, the Owner account belongs to the business with its recovery details on file, System Backups is on, and a local backup file is stored away from the console.

Check your network this week

You do not need UniFi to ask the right questions. If you are responsible for the network, an hour with these will show where the gaps are:

  • Who holds the administrator passwords for the router, Wi-Fi, switches, cameras and door system?
  • Is guest Wi-Fi a separate, isolated network, or the staff network with a second password?
  • Where does camera footage live, how many days does it keep, and what happens if the recorder is stolen?
  • When were the router and access points last updated, and who would hear about an urgent fix?
  • Is there a recent configuration backup stored somewhere other than the device itself?
  • If the main internet line fails, does anything take over, or does the office stop?
  • On a UniFi network, which account is the Owner, and does the business control it?

Test only networks you are responsible for, and tell the owner before you do. A phone on the guest Wi-Fi that can open the printer's web page answers the second question in a minute.

The honest trade-off

UniFi is not the only good platform and it is not right for every building. A large campus or a site with strict compliance rules may need something else, and we will say so. For the small and mid-sized businesses we mostly serve, it gives enterprise features at a price that makes sense, in one console a non-technical owner can actually read.

Compliance needs the same honesty. Segmentation, logging and defined roles help an organization meet security requirements, but the equipment does not write the policies, train the staff or keep the records that show the rules are followed. Good equipment supports compliance. It does not deliver it.

The rest of the cost is attention. Releases need reading and testing before they reach a working office, the console needs patching like any server, and the Owner account needs someone at the business who keeps control of it.

Who it suits

An office, a clinic, a shop, a warehouse, a church, a school, a site with a yard across the road. Anywhere the network has grown by accident and someone is tired of it. It also suits the second office, the warehouse across the lot and the home office of the person who runs the books, because all of them show up in the same console.

Where ALCO can help

ALCO's managed networking and UniFi by Ubiquiti services cover the work described here, from the survey and cabling through cutover, monitoring, updates and changes. The ALCO help desk is staffed 24 hours a day, including holidays, and calls are answered by a person. The UniFi page is at alcohq.com/services/unifi and the wider install and management work is at alcohq.com/services/managed-networking if you want the detail.

Sources